Wine-Mate 12000SSA Split Floor-Mounted Wine Cooling System
WINE~MATE split floor-mounted cooling systems WM-12000SSA are designed to provide a cold environment between 50~65 °F with a humidity range within 50~75% RH for a properly insulated wine cellar. These temperature and humidity ranges are optimized for long term storage of wine like that in natural caves. SSA evaporator units are designed for mounting on the floor, making them an ideal choice for quick and convenient installation. SSA cooling systems consist of a remote condensing unit and an evaporator unit and they are connected by a liquid line and an insulated suction line. SSA condensing units can be located away from the wine cellars up to 75 ft so that noise and compressor vibration are isolated.
Wine-Mate cooling systems are also perfect for storing fine fur, cigars, leather goods, chocolate and salami! For an additional cost, Wine-Mate systems can be customized for your exact storage needs - please call for more information!
Detailed installation and clearance guidelines:
View the Owner's Manual for this unit
- Split Wine Cooling System provides floor-mounted installation.
- Outdoor enclosure is included with condensing unit.
- SSA evaporator units have a water-repellent self-cleaning and anti-microbial coat that helps your equipment stay efficient and actively kills harmful bio-film growth.
- SSA condensing units shall not be exposed to temperatures higher than 110°F or lower than 50°F.
- If the exhaust ambient temperature exceeds 110 °F, one size larger unit must be used.
- Low ambient kit must be used for below 50°F cold weather operation
- SSA split cooling systems have adjustable evaporator fan. Fan speed is adjustable because a speed controller is wired in line with the blower motors.
- Adjust evaporator fan speed through the knob to work with various wine racks or rooms to provide proper air flow.
NOTE: Split systems must be installed by a certified refrigeration technician. Purchase does not include the copper tubing.
Wine-Mate split cooling systems use EC fan motors that meet federal regulation of 10 CFR 431.306 and are required by the federal law.
AVAILABLE OPTIONS and CONFIGURATIONS:
- Touch button temperature controller with bottle probe or touch screen WiFi thermostat with humidity monitoring
- Optional Wine Bottle Probe: Provides the most accurate reading of your wine's temperature. The probe measures the temperature of the liquid inside the bottle to ensure your wine is kept at the ideal temperature and plugs directly into your cellar cooling system.
- Our new digital controller provides 3 connections. One of them can be used as bottle probe, the other can be used for the alarm. Both bottle probe and alarm feature can be available at the same time.
- This unit can be configured for use with 220V/50Hz voltage. Please call us at 1-800-777-8466 for more details.
SPECS & RESOURCES
- EVAPORATOR UNIT DIMENSIONS: 22-7/8"W x 18-1/4"D x 39-1/8"H
- EVAPORATOR UNIT WEIGHT: 58 lbs
- Evaporator Unit is ETL & NSF certified
- CONDENSING UNIT DIMENSIONS: 26"W x 22"D x 18"H
- CONDENSING UNIT WEIGHT: 135 lbs
- ELECTRICAL REQUIREMENTS: Evaporator Unit 115V 60Hz 2.5A, Condensing Unit 115V 60Hz 15A. The power cord must be plugged into a 3-prong grounding-type wall receptacle, grounded in accordance with the National Electrical Code, ANSI/NFPA 70 – latest edition and local codes and ordinances.
- COVERAGE SIZE: 3300 Cubic Feet
- NOISE: 65 dBA
- CFM: 1150
- BTU/h: 12000
Important information regarding Prop. 65 for CA residents.
Prop. 65 Warning Label
Do You Have the Right Wine-Mate Wine Cooling System For Your Project?
Find the best cooling system for your wine cabinet or wine cellar by calculating the heat load using one of our calculators.
You will have the following advantages of using a bottle probe.
1) Air temperature in the cabinet may fluctuate, but the wine temperature in the bottle is constant.
2) You can put a cooling unit in a full wine cabinet and show both the air temperature and bottle temperature.
Note: Wine-Mate cooling systems cannot have both the Bottle Probe and Wi-Fi optional features plugged in at the same time. It can only be one or the other.
Please allow 2-3 business weeks for production. Thank you.
Note: These cooling systems require professional installation by licensed refrigeration technicians.
| On Sale | No |
|---|---|
| Features | Click links to view |
| Shipping Cost | $499.00 |
| Free Shipping TAG | No |
