Wine-Mate 8520HZD Self-Contained Wine Cooling System

Features

• -220/240 Volt Cooling System
• -Not for use in the USA (incorrect voltage)
• -SELF-CONTAINED: This unit is a self-contained, all-in-one, and ready for use. No copper tubing or drain line are required.
• -EXHAUST: Rear (standard) or top
• -VENTING: When installed into a wine cabinet or cellar, this unit must vent outside.
• -TEMPERATURE: The WM-8520HZD cooling unit is designed and used to provide a stable temperature between 50~65 °F for a properly insulated and sized space.
• -AMBIENT TEMPERATURE RANGE: The ambient temperature range for WM-8520HZD should not be higher than 95°F or lower than 50°F in order to operate properly.
• -HUMIDITY CONTROL: The refrigerated space will maintain humidity within the range of 50~75% RH. We use an exclusive method to provide additional humidity.
• -REFRIGERANT: Uses R134a refrigerant which is considered environmentally friendly
• -DISPLAY: Digital display with easy push-button controls
• -NOTIFICATIONS: Display notifications provide alerts help to protect your wine cellar and alert you when maintenance is required.
• -CONTROL PANEL: Control panel includes digital display, manual defrost button, up and down arrows to adjust temperature as well as browse parameters, power button, and SET button.
• -ELECTRICAL REQUIREMENTS: 220V 50Hz 8A. Dedicated 15 AMP circuit is required. Power supply must be grounded with 3 prong plug and must be in accordance with National Electrical Code, ANSI/NFPA 70.
• -Four high speed fans for air efficiency
• -Grille size optimized for easy cleaning and safety
• -Bottom supply vent
• -WARRANTY: Self-contained units 1 year warranty on parts, 1 year labor.

AVAILABLE OPTIONS and CONFIGURATIONS:

• -Standard rear exhaust with the option to upgrade to top exhaust for an additional fee.
• -Mounting brackets are available for an additional fee.
• -Add the Wine Bottle Probe to receive the most accurate reading of your wine's temperature. The Wine Bottle Probe measures the temperature of the liquid inside the bottle to ensure your wine is kept at the ideal temperature and plugs directly into your cellar cooling system. You will have the following advantages of using a bottle probe.
  1) Air temperature in the cabinet may fluctuate, but the wine temperature in the bottle is constant.
  2) You can put a cooling unit in a full wine cabinet and show both the air temperature and bottle temperature.

SPECS & RESOURCES

• -DIMENSIONS: 17” W x 18” D x 22” H
• -ELECTRICAL REQUIREMENTS: 220V 50Hz 8A
• -WEIGHT: 110 lb
• -CFM: 420
• -NOISE: 63 dBA for cooling unit, 60 dBA for cabinet
• -COVERAGE SIZE: 1800 cu ft

Important information regarding Prop. 65 for CA residents.
Prop. 65 Warning Label

Digital control panel makes it easy to change and read temperature settings.

Add the Wine Bottle Probe. The probe provides an accurate reading of the temperature of your wine.

Compare Sound Levels 3 Feet from the Cooling Unit vs 3 Feet from the Cellar