Wine-Mate 2500HTD Self-Contained Humidity & Temperature Wine Cooling System

Wine-Mate 2500HTD Self-Contained Humidity & Temperature Wine Cooling System
  • Video Thumbnail
Shipping: $99.00
SKU Number: WM-2500HTD


Mounting Brackets for Self-Contained Wine-Mate Cooling Units. Please note: some installations may require 4 brackets instead of 2.

The WM-2500HTD wine cooling unit packs 1000 more BTU of cooling capacity into the same space as the VINO-1500HTD. The Wine-Mate HTD line represents our latest innovation in climate control and the 2500HTD unit has a capacity of up to 200 cubic feet. This self-contained unit not only controls the temperature in your cabinet but also moderates the humidity to a much greater degree than previous models. This unit features humidity and temperature digital control using innovative technology. An over-sized evaporator provides subtle cooling, with tube-axial fans for both the condenser and evaporator. Extra insulation is provided for both thermal and noise isolation. HTD evaporator units have a special coil coating and provide two-way air supply for better operation. The 2500HTD has a robust housing and the grill size has been optimized for safety and easier cleaning. The Wine-Mate 2500HTD is a self-contained, ready-for-use cooling system with easy installation. Options: Multiple exhaust options for top or rear hot air exhaust.

Wine-Mate cooling systems are also perfect for storing fine fur, cigars, leather goods, chocolate and salami! For an additional cost, Wine-Mate systems can be customized for your exact storage needs - please call for more information!


  • -SELF-CONTAINED: This unit is a self-contained, all-in-one, and ready for use. No copper tubing or drain line are required.
  • -EXHAUST: Rear (standard) or top
  • -VENTING: When installed into a wine cabinet, this unit must vent outside the wine cabinet.
  • -TEMPERATURE: The WM-2500HTD cooling unit is designed and used to provide a stable temperature between 50~65 °F for a properly insulated and sized space.
  • -AMBIENT TEMPERATURE RANGE: The ambient temperature range for WM-2500HTD should not be higher than 95°F or lower than 50°F in order to operate properly.
  • -If the exhaust ambient temperature exceeds 95°F, one size larger unit must be used.
  • -HUMIDITY CONTROL: The refrigerated space will maintain humidity within the range of 50~75% RH. We use an innovative method to provide additional humidity.
  • -WM-2500HTD cooling unit can only adjust fan run time for humidity, not speed. Adjust evaporator fan running time through the control program to adjust humidity.
  • -REFRIGERANT: Uses R134a refrigerant which is considered environmentally friendly
  • -DISPLAY: Digital display with easy push-button controls
  • -NOTIFICATIONS: Display notifications provide alerts help to protect your wine cellar and alert you when maintenance is required.
  • -CONTROL PANEL: Control panel includes digital display, manual defrost button, up and down arrows to adjust temperature as well as browse parameters, power button, and SET button.
  • -HTD evaporators have a water-repellent self-cleaning and anti-microbial coat that helps your equipment stay efficient and actively kills harmful bio-film growth.
  • -Exchangeable supply grille can be used for front, back, and down cold air distribution.
  • -Extra insulations are used for both thermal and noise isolation.
  • -Condensate tray is used for humidity adjustment.
  • -WARRANTY: Self-contained units 1 year warranty on parts, 1 year labor.

NOTE: Wine-Mate self-contained units must be operated in an upright position at all times. They should not be placed on their side or flipped upside down.

Wine Bottle Probe and Digital Control Panel
The probe provides an accurate reading of the temperature of your wine, and this easy-to-use digital control panel makes it simple to change settings.

You will have the following advantages of using a bottle probe.
1) Air temperature in the cabinet may fluctuate, but the wine temperature in the bottle is constant.
2) You can put a cooling unit in a full wine cabinet and show both the air temperature and bottle temperature.


  • -Standard rear exhaust with the option to upgrade to top exhaust for an additional fee.
  • -Standard left side power cord with the option to upgrade to the rear cord for an additional fee.
  • -Mounting brackets are available for an additional fee.
  • -Add the Wine Bottle Probe to receive the most accurate reading of your wine's temperature. The Wine Bottle Probe measures the temperature of the liquid inside the bottle to ensure your wine is kept at the ideal temperature and plugs directly into your cellar cooling system.
  • -Add the Energy Saving & Quick Chilling upgrade to a digital temperature control of Wine-Mate cooling system.
    1) Energy Saving enables the compressor to run less time in certain circumstances to save energy by increasing the set-point. To activate the Energy Saving mode, turn on the switch.
    2) Quick Chilling enables the compressor to run continuously without stopping for a period of preset time for pull-down cooling. To activate Quick Chilling press and hold the UP icon for more than 3 seconds. To end Quick Chilling press and hold the UP icon for more than 3 seconds again.


  • -DIMENSIONS: 18” W x 16 1/2” D x 10 1/2” H
  • -COVERAGE SIZE: 200 Cubic Feet
  • -WEIGHT: 60 lbs
  • -NOISE: 56 dBA for cooling unit, 52 dBA for cabinet
  • -CFM: 180
  • -BTU/h: 2500

Important information regarding Prop. 65 for CA residents.
Prop. 65 Warning Label

Compare Sound Levels 3 Feet from the Cooling Unit vs 3 Feet from the Cellar
dBA Sound Chart for Self-Contained Wine-Mates

Please allow 2-3 business weeks for production. Thank you.

Note: Extra air filter is not recommended for models of 2500 and below since it may restrict air flow. Instead, cabinet grill is used as a deterrent and protection from dust. However, the filter and frame can be attached to the wall grill and the filter will only cover the air intake portion of the grill.

If there are windows or if the cabinet is not located inside the home at the proper ambient temperature, the bottle coverage capacity and cubic feet will need to be reduced.

Wine~Mate cooling units are available in rear or top exhaust, but Vinotemp cabinets are available in rear, front, top or side vents depending on how the cooling unit is installed.

Reviews of Wine-Mate 2500HTD Self-Contained Humidity & Temperature Wine Cooling System

Average Rating :

5 Based on 4 ratings

Most Accepted Reviews


Reviewed on 7/27/2020, By RICHARD W.
  • Quality
Alyson Rall was very helpful during the process of buying my new cooling unit. First, she helped to see if there was a way to repair my old unit. When we determined it was beyond repair, she was helpful in getting the new cooling unit shipped as quickly as possible. I appreciated her effort on my behalf.
Share with Google+ Was this review helpful ? Yes/No


Reviewed on 1/27/2020, By Curt B
  • Quality
Helped me validate it would replace my old HVAC unit, timely shipping
Share with Google+ Was this review helpful ? Yes/No


Reviewed on 1/13/2020, By Curtis
  • Quality
Replacement for original chiller. Received in timely manor and fit with minimal clearancing.
Share with Google+ Was this review helpful ? Yes/No

great service

Reviewed on 9/6/2019, By Michael S.
  • Quality
I purchased a replacement cooling unit for my vinotemp unit that is 8-10 years old. Your sales person was very helpful and I got the unit very quickly. It was very easy to install
Share with Google+ Was this review helpful ? Yes/No

Write Your Own Review

You're reviewing: Wine-Mate 2500HTD Self-Contained Humidity & Temperature Wine Cooling System

How do you rate this product? *
  • Quality